Canon iR1018 Series User Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
3-37
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
Using a NetBIOS Network
This chapter describes settings and procedures for using
the machine with a NetBIOS network.
1. Protocol Settings for NetBIOS Network (See
p. 3-38)
Specify the machine’s protocol settings. Any of the following can
be used to specify the settings.
– Machine’s operation panel (Additional Functions menu)
– Web browser (Remote UI)
– NetSpot Device Installer (Canon utility software included in
the User Software CD)
2. Setting Up a Computer for Printing/Sending a
Fax (See p. 3-23)
Specify the settings for each computer you use for printing/
sending a fax.
3. Setting Up a Computer as a File Server (See
p. 3-41)
Specify the settings of the computer receiving data sent from the
machine.
NOTE
– It is recommended that step 1 and 3 be performed by the
network manager.
– The only base protocol supported by a NetBIOS network is
TCP/IP. NetBEUI is not supported with the machine.
– Use the operation panel or NetSpot Device Installer if you are
configuring the TCP/IP settings for the first time. After
configuring the settings, you can change the content by using
the Remote UI or NetSpot Console. NetSpot Console can be
downloaded from Canon’s Web site.

Canon iR1018 Series Specifications

General

Print Technology	Laser
Max Paper Size	A4
Duplex Printing	Manual
Connectivity	USB 2.0
Paper Output	100 sheets
Copy Resolution	600 x 600 dpi
Network Ready	No
Scanner	Yes
Copier	Yes
Printer	Yes
Fax	No
Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Paper Input (Standard)	250 sheets
Paper Sizes	A4, A5, B5
Copy Speed	18 cpm
Multiple Copy	Up to 99 copies
Scan Resolution	600 x 600 dpi
Scan to	PC
First Copy Time	Less than 10 seconds