Canon iR1018 Series User Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
8-20
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
Telephone Problems
Cannot dial.
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
“Set Up the Machine,” in the Quick Start Guide.)
Q Is the power cord plugged in securely?
A Check that the power cord is securely plugged into
the machine and into the wall outlet. If the machine
is plugged into a power strip, make sure the power
strip is plugged in and turned on.
Q Is the main power switch turned on?
A Turn on the main power switch.
Q Is the machine set for the correct telephone line
type?
A Make sure the machine is set for the correct
telephone line type. (See “Set the Machine for
Sending Faxes,” in the Quick Start Guide.)
Telephone disconnects while you are talking.
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
“Set Up the Machine,” in the Quick Start Guide.)
Q Is the telephone cable defective?
A Use another cord.

Canon iR1018 Series Specifications

General

Print Technology	Laser
Max Paper Size	A4
Duplex Printing	Manual
Connectivity	USB 2.0
Paper Output	100 sheets
Copy Resolution	600 x 600 dpi
Network Ready	No
Scanner	Yes
Copier	Yes
Printer	Yes
Fax	No
Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Paper Input (Standard)	250 sheets
Paper Sizes	A4, A5, B5
Copy Speed	18 cpm
Multiple Copy	Up to 99 copies
Scan Resolution	600 x 600 dpi
Scan to	PC
First Copy Time	Less than 10 seconds