1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
3-15
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
6. Confirm that <PRIMARY SERVER> is
displayed, then press [OK].
7. Use the numeric keys to enter the IP address
of a primary DNS server, then press [OK].
8. If you want to specify <SECONDARY
SERVER>, press [OK].
Otherwise, press [ ], skip to step 10.
9. Use the numeric keys to enter the IP address
of a secondary DNS server, then press [OK].
10.Confirm that <HOST NAME> is displayed,
then press [OK].
11.Use the numeric keys to enter the desired
host name, then press [OK].
12.Confirm that <DOMAIN NAME> is displayed,
then press [OK].
13.Use the numeric keys to enter the network
domain name, then press [OK].
14.Press [Additional Functions] so that <DNS
SETTINGS> in <TCP/IP SETTINGS> is
displayed.
15.Press [ ] or [ ] to select <USE LPD>,
then press [OK].
16.Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<ON>: Uses LPD as the print application.
<OFF>: Does not use LPD.
17.Press [ ] or [ ] to select <RAW
SETTINGS>, then press [OK].
18.Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<ON>: Uses Raw as the print application.
<OFF>: Does not use Raw.
HOST NAME :a
host name
Ex.
DOMAIN NAME :a
org.company.com
Ex.
To Next Page
Loading...
Need help?
General
