Canon iR1018 Series User Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
6-11
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
■ Accepting Print Jobs with Unknown IDs
You can specify whether to accept or reject print jobs from
computers that do not correspond with a registered Department
ID.
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set,
enter the System Manager ID and System Password using the
numeric keys, then press [Log In/Out].
3. Press [ ] or [ ] to select <MANAGE
DEPT. ID>, then press [OK].
4. Press [ ] or [ ] to select <ON>, then
press [OK].
5. Press [ ] or [ ] to select <PDL JOBS W/
OUT ID>, then press [OK].
6. Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<ON>: The machine accepts print jobs from computers that do
not correspond with a registered Department ID.
<OFF>: The machine does not accept print jobs from computers
that do not correspond with a registered Department ID, and you
must insert a control card to operate the machine.
7. Press [Stop] to return to the standby mode.

Canon iR1018 Series Specifications

General

Print Technology	Laser
Max Paper Size	A4
Duplex Printing	Manual
Connectivity	USB 2.0
Paper Output	100 sheets
Copy Resolution	600 x 600 dpi
Network Ready	No
Scanner	Yes
Copier	Yes
Printer	Yes
Fax	No
Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Paper Input (Standard)	250 sheets
Paper Sizes	A4, A5, B5
Copy Speed	18 cpm
Multiple Copy	Up to 99 copies
Scan Resolution	600 x 600 dpi
Scan to	PC
First Copy Time	Less than 10 seconds