1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
5-2
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
Checking Job and Machine Status
System monitor enables you to view the transmission and
reception results, monitor the status of the copy, send,
receive, report, and print jobs currently being processed.
■ Checking Transmission/Reception
Results
1. Press [System Monitor].
2. Press [ ] or [ ] to select <TX/RX LOG>,
then press [OK].
3. Press [ ] or [ ] to view the required
transmission/reception result.
4. Press [Stop] to return to the standby mode.
NOTE
If you set <CHECKING THE LOG> to <OFF> in <SYSTEM
SETTINGS>, transmission/reception result does not appear in
the LCD.
■ Checking and Deleting Documents
Stored in Memory
1. Press [System Monitor].
2. Press [ ] or [ ] to select <RX/TX
STATUS>, then press [OK].
3. Press [ ] or [ ] to select the desired
document, then press [OK].
If you select a document with the message <TX STNDBY>,
<TX TRM...>, or <RX TRM...>, skip to step 5.
4. If you want to delete the document, press
[ ] or [ ] to select <CANCEL>, then
press [OK].
5. Press [ ] to select <YES>.
If you do not want to cancel the job, press [ ] to select <NO>.
6. Press [Stop] to return to the standby mode.
To Next Page
Loading...
Need help?
General
