1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
1-7
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
3. Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
4. Press [ ] or [ ] to select <TX
SETTINGS>, then press [OK].
5. Press [ ] or [ ] to select <AUTO
REDIAL>, then press [OK].
6. Press [ ] or [ ] to select <ON>, then
press [OK].
7. Confirm that <REDIAL TIMES> is displayed,
then press [OK].
8. Use [ ], [ ], or numeric keys to enter the
number of redials (1 to 10 times) the machine
will make, then press [OK].
9. Confirm that <REDIAL INTERVAL> is
displayed, then press [OK].
10.Use [ ], [ ], or numeric keys to enter the
time (2 to 99 minutes, in one-minute
increments) between redials, then press
[OK].
11.Confirm that <TX ERROR REDIAL> is
displayed, then press [OK].
12.Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<ON>: Resends all pages if an error occurs during transmission.
<OFF>: Does not redial even if an error occurs during
transmission.
13.Press [Stop] to return to the standby mode.
■ Send Settings
You can set the document's name, a subject line, message body
text, and reply-to address, and e-mail priority common to all
sending jobs. The following settings will be effective when
sending documents depending on the sending method you
select:
– E-mail: <TX FILE NAME>, <SUBJECT>, <MESSAGE
TEXT>, <REPLY-TO>, <E-MAIL PRIORITY>
– I-fax: <TX FILE NAME>, <SUBJECT>, <MESSAGE TEXT>,
<REPLY-TO>
– File server (FTP and SMB): <TX FILE NAME>, <MESSAGE
TEXT>
To Next Page
Loading...
Need help?
General
