1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
1-9
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
Fax Dialing Features
■ Switching Temporarily to Tone Dialing
If your machine is set for pulse dialing, use the procedure below
to switch to tone dialing to use information services (e.g., banks,
airline reservations, and hotel reservations).
NOTE
To talk to the other party, you will need to connect an external
telephone to the machine.
1. Press [SEND].
2. Confirm that <FAX> is displayed, then press
[OK].
3. Press [Hook].
NOTE
Make sure to confirm the dial tone before entering a fax number.
If you enter the number before the dial tone can be heard, the call
may not be connected, or the wrong number may be dialed.
4. Use the numeric keys to dial the required
information service.
5. When the recorded message of the
information service answers, press [Tone] to
switch to tone dialing.
6. Use the numeric keys to enter the numbers
requested by the information service.
7. If you want to receive faxes, press [Start].
If you are using the external telephone, hang up the handset after
pressing [Start].
To Next Page
Loading...
Need help?
General
