Canon iR1019 User Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
3-17
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
30.Press [Additional Functions] so that <PORT
NO.> in <TCP/IP SETTINGS> is displayed.
31.Press [ ] or [ ] to select <SET IP ADD
RANGE>, then press [OK].
32.Press [ ] or [ ] to select <ON>, then
press [OK].
33.Confirm that <PERMIT/REJECT> is
displayed, then press [OK].
34.Press [ ] or [ ] to select <REJECT> or
<PERMIT>, then press [OK].
<REJECT>: Restricts the IP addresses of computers from which
data (print/fax job) can be sent to the machine.
<PERMIT>: Permits the IP addresses of computers from which
data (print/fax job) can be sent to the machine.
35.Confirm that <SET IP ADDRESS> is
displayed, then press [OK].
36.Press [ ] or [ ] to select from <IP
ADDRESS 1> through <IP ADDRESS 4>, then
press [OK].
37.Confirm that <START IP ADDRESS> is
displayed, then press [OK].
38.Use the numeric keys to enter the start IP
address, then press [OK].
39.Confirm that <END IP ADDRESS> is
displayed, then press [OK]
40.Use the numeric keys to enter the end IP
address, then press [OK].
NOTE
To enter another IP address range, repeat step 36 to 40. After
you specified the <END IP ADDRESS> of <IP ADDRESS 4>,
confirm that <RX MAC ADD SET.> is displayed, press [OK],
then skip to step 43.
41.Press [Additional Functions] so that <SET IP
ADD RANGE> in <TCP/IP SETTINGS> is
displayed.
42.Press [ ] or [ ] to select <RX MAC ADD
SET.>, then press [OK].

Canon iR1019 Specifications

General

Brand	Canon
Model	iR1019
Category	Printer
Language	English