Canon iR1019 User Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
3-18
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
43.Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<OFF>: Disables a MAC address filter. Skip to step 46.
<ON>: Enables a MAC address filter.
NOTE
If you select <ON>, you will be unable to access from MAC
addresses which have not been specified.
44.Press [ ] or [ ] to select from <PERMIT
RX ADD1> through <PERMIT RX ADD5>, then
press [OK].
45.Specify the MAC addresses to allow access
to, then press [OK].
Repeat step 44 and 45 to specify other MAC addresses.
46.Press [Stop] to return to the standby mode.
47.Restart the machine.
E-mail/I-Fax Settings
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set,
enter the System Manager ID and System Password using the
numeric keys, then press [Log In/Out].
3. Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4. Press [ ] or [ ] to select <E-MAIL/l-
FAX>, then press [OK].
5. Confirm that <SMTP RX> is displayed, then
press [OK].

Canon iR1019 Specifications

General

Brand	Canon
Model	iR1019
Category	Printer
Language	English