Canon LV 7365 User Manual

32
❼
Turning off the Projector
To turn off the projector:
3. Projecting an Image (Basic Operation)
MENU
BACK
KEYSTONE
WARNING
P
O
W
E
R
AUTO PC
INPUT
VOL
-
VOL
+
LAMP
POWER
INPUTIMAGE
ASPECT
INFO.
MENU
NO SHO W
AUTO PC
1. PressthePOWERbuttonontheprojectorcabinetor
the remote control. The “Push POWER buttonagain
toturnoffpower.”messagewillappear.
WARNING
LAMP
WARNING
LAMP
WARNING
LAMP
Power On Fan running Standby
Steady
green light
Blinking
orange light
Steady
orange light
CAUTION:
Parts of the projector will become heated during opera-
tion. Use caution when picking up the projector immedi-
ately after it has been operating.
CAUTION:
• The projector cannot be turned off for 60 seconds
after the lamp is turned on and while the POWER
indicator is blinking green. Doing so could cause pre-
mature lamp failure.
• Do not turn off the AC power by pressing the main
power switch or by unplugging the power cord when
the projector is powered on. Doing so can cause
damage to the projector.
2.Press the OK button or press the POWERbutton
again.
 ThePOWERindicatorwillgloworange.Afterthepro
-
jector turns off, the cooling fans keep operating for
30seconds(Cooling-offtime).
 Immediately after turning on the projector and dis
-
playing an image, you cannot turn off the projector
for60seconds.
3.TurnofftheMainPowerswitch.Thepowerindicator
willgoout.
TIP: The main power of the projector can be turned off by pressing
the main power switch or by unplugging the power cord even
during the cool down period after the projector is turned off.
NOTE: Do not turn off the main power within 10 seconds of making
adjustment or setting changes and closing the menu.
Doing so can cause loss of adjustments and settings.

Canon LV 7365 Specifications

General

Vertical scan range	50 - 120 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	300 \
Projector native resolution	XGA (1024x768)
Focus	Manual
Digital zoom	4 x
Focal length range	17.7 - 28.3 mm
Aspect ratio	4:3
Dimensions (WxDxH)	310 x 265 x 109 mm
Power requirements	100V - 240V AC, 50/60Hz
Lamp type	NSH
Lamp power	210 W
Light source type	Lamp
Dot clock scanning frequency	108 MHz
RMS rated power	5 W
Headphone outputs	1
Power consumption (standby)	9 W
Power consumption (typical)	295 W

Weight and Dimensions

Weight	3300 g