Canon LV 7365 User Manual

37
. Convenient Features
❺
Preventing the Unauthorized Use of the Projector
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a
password is set, turning on the projector will display the password input screen. Unless the correct password is
entered, the projector cannot project an image.
To enable the Password function:
1. PresstheMENUbutton.
 
2.UsetheSELECT
or buttontoselect[Setup]andpresstheOKorSELECT button.
3.UsetheSELECT
or buttontoselect[Installation].
4.UsetheSELECT
or buttontoselect[Password]andpresstheOKorSELECT button.
5.UsetheSELECT
or buttontoselect[On]andpresstheOKbutton.
 
6.TypeinacombinationofthefourSELECTbuttons
andpresstheOKbutton.
 
NOTE: A password must be 4 to 10 digits in length. Please make a note of your password.
[Menu example for LV-7365]
[Menu example for LV-7365]

Canon LV 7365 Specifications

General

Vertical scan range	50 - 120 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	300 \
Projector native resolution	XGA (1024x768)
Focus	Manual
Digital zoom	4 x
Focal length range	17.7 - 28.3 mm
Aspect ratio	4:3
Dimensions (WxDxH)	310 x 265 x 109 mm
Power requirements	100V - 240V AC, 50/60Hz
Lamp type	NSH
Lamp power	210 W
Light source type	Lamp
Dot clock scanning frequency	108 MHz
RMS rated power	5 W
Headphone outputs	1
Power consumption (standby)	9 W
Power consumption (typical)	295 W

Weight and Dimensions

Weight	3300 g