11
E
Mastering
the Basics
Powering Your Camcorder
Before operating your camcorder, you will need to use the power adapter to:
Provide power from a household power socket
or
Charge a battery pack
Notes:
• The power adapter converts current from a household power socket
(100–240 V AC, 50/60 Hz) to the DC current used by your camcorder.
• If the adapter is used next to a TV, it may cause bars to appear on the
TV — move the adapter away from the TV or the aerial cable.
• Do not connect products not expressly recommended to the camcorder’s
DC terminal. Likewise, do not connect products not expressly
recommended to the power adapter.
Connecting the Camcorder to a Household Power Socket
1
2
3
4
(
V
C
R
)
P
L
A
Y
C
A
M
E
R
A
O
F
F
Use the power adapter to provide your camcorder with instant power from a
household power socket. Always turn the camcorder off before
connecting/removing the power source.
1. Set the POWER switch to OFF.
2. Connect the power cord to the power adapter.
3. Plug the power cord into a household power socket.
4. Connect the power adapter to the camcorder’s DC IN
terminal.
5. Disconnect the power adapter from the camcorder after use.
Unplug the power cord from the household power socket,
then disconnect it from the adapter.
To Next Page
Loading...
Need help?
General
