79
E
Using the Full
Range of Features
Adjusting Focus Manually
The camcorder focuses automatically. All you have to do is point and the
subject in the centre of the screen will usually be in sharp focus. It may
happen that a subject is not suitable for autofocus. Use the manual focusing
function to adjust the focus.
1. Press the FOCUS button to turn the autofocus off.
• MF appears in the display.
• The focus remains locked at the point set by autofocus.
2. Rotate the focus ring to set the focus.
• Rotate the focus ring clockwise to move the focus farther away.
• Rotate the focus ring counterclockwise to bring the focus nearer.
• If you zoom in on your subject after turning off the autofocus, it may
not stay in focus. It is generally best to adjust the zoom first and then
the focus.
Notes:
• The camcorder will return to autofocus when selecting the [ (Easy
Recording) program.
• Autofocus can not be turned off in [ (Easy Recording) program.
• See “Troubleshooting” on p. 165 for a list of subjects that may not be
suitable for autofocus.
Use this function when you wish to focus on faraway subjects such as
mountains or fireworks.
Press the focus button more than 3 seconds in step 1 above to record in
infinity focus mode. The MF∞ icon will appear on the display.
∞ will disappear when you operate the zoom or the focus ring and the
camcorder will change to manual focus.
Infinity Focus
Focus ring
To Next Page
Loading...
Need help?
General
