114
E
Using a Memory Card
Recording Still Images from a Tape
Record an image from a tape onto a memory card as still images. To
automatically record multiple still images from a tape to a memory card, refer
to “Copying Still Images from Tape to Memory Card” ( 146).
• The still image’s data code will reflect the date and time it has been
recorded to the memory card.
• The image size of a still image recorded from tape onto a memory card will
be 640 × 480.
1. Play back the tape.
2. When the image you wish to record appears in the display,
press the PHOTO button halfway down and hold it.
• The tape is set to playback pause mode and the number of images that
can still be recorded on the memory card appears in the display.
3. Press the PHOTO button fully down to record the still image
to the memory card.
• The card access indicator flashes.
Notes:
• You can also set the tape to playback pause mode in step 1 and record the
image with only 1 full press of PHOTO button.
• If you record an image onto a memory card that was originally recorded in
the 16:9 mode for wide screen TV’s, the image will appear to be vertically
“squashed” (compressed).
• The shutter sound doesn’t sound in TAPE PLAY (VCR) mode.
Tape
Memory card
Press the PHOTO
button fully down
+
To Next Page
Loading...
Need help?
General
