149
E
Using a Memory Card
Connecting to a PC Using a USB Cable
You can download still images/movies from a memory card to a PC
connected via the USB interface. By using the provided software, you can
organize and store still images/movies and print out still images with added
titles or frames.
Use the USB cable and the Canon DIGITAL VIDEO SOLUTION DISK/ArcSoft
Camera Suite CD with the camcorder.
• For transferring still images and movies from tape or memory card to your
PC using a DV cable, see p. 105.
For details on how to connect the camcorder to a PC and install
and operate the software, refer to the Canon DIGITAL VIDEO
SOLUTION DISK Software Instruction Manual.
• Refer also to your PC manual.
“PC CONNECT[USB]” appears to indicate that the
camcorder is connected to the PC with a USB
cable.
Cautions:
• Do not disconnect the USB cable, remove the memory card, or turn off the
camcorder or the computer while data is being transferred (while the
camcorder’s card access indicator is flashing). Doing so may damage the
memory card’s data.
• The connection may not work properly depending on the specifications
and settings of the software and PC.
• The image files on your memory card and the image files you have stored
(downloaded) to the hard disk drive of your computer are your valuable,
original data files. If you wish to use image files on your computer, be sure
to make copies of them first, and use the copied file, retaining the original.
IFC-300PCU USB cable
: Signal flow
To Next Page
Loading...
Need help?
General
