Canon Pixma iP110 series User Manual

Checking the Ink Status with the Ink Lamps
1. Make sure that the power is turned on.
2. Open the print head cover.
Replacing Procedure
3. Check the ink lamp.
Close the print head cover after checking the ink lamp status.
Replacing Procedure
• The ink lamp is on.
The ink tank is correctly installed.
• The ink lamp is flashing.
Flashing slowly (at around 3-second intervals)
...... Repeats
Ink tank is running low. Prepare a new ink tank.
Flashing fast (at around 1-second intervals)
...... Repeats
Ink has run out. Replace it with a new one.
•
The ink lamp is off.
The ink tank is not installed properly or the function for detecting the remaining ink level is
disabled. If the ink tank is not firmly in place, press the mark on the ink tank until the ink tank
clicks into place.
If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer
cannot print. Check the Alarm lamp on the printer.
If an Error Occurs
Note
•
You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
128

Canon Pixma iP110 series Specifications

General

Print Technology	Inkjet
Max Print Resolution	9600 x 2400 dpi
Print Speed (Monochrome)	9.0 ipm
Connectivity	USB 2.0, Wi-Fi
Weight	2.0 kg
Wireless Printing	Yes
Operating Temperature	5-35°C
Operating Humidity	10-90% RH
Mobile Printing	Apple AirPrint, Google Cloud Print
Paper Handling	50 Sheets
Paper Sizes	Letter, Legal, Envelopes
Printer Type	Portable
Number of Nozzles	1, 856 nozzles
Paper Sizes Supported	A4, A5, B5, Letter, Legal, Envelopes (DL, COM10)
Power Consumption	Approx. 10 W (printing), Approx. 1.8 W (standby)
Ink Droplet Size	2 picoliters