Canon Pixma iP110 series User Manual

Aligning the Print Head Position from Your Computer
Print head alignment corrects the installation positions of the print head and improves deviated colors and
lines.
This printer supports two head alignment methods: automatic head alignment and manual head alignment.
Normally, the printer is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
The procedure for performing automatic print head alignment is as follows:
Print Head Alignment
1.
Select Test Print from the pop-up menu on the Canon IJ Printer Utility
2.
Click the Print Head Alignment icon
A message is displayed.
3.
Set the paper thickness lever to the right, and load paper in the printer
Load one sheet of A4 size or Letter size Matte Photo Paper (MP-101) into the rear tray.
Note
•
The type of media and number of sheets to be used differ when you select the manual head
alignment.
4.
Execute head alignment
Make sure that the printer is on and click Align Print Head.
Print head alignment starts.
Important
•
Do not open the print head cover while printing is in progress.
Note
•
Wait until printing ends before performing other operations. Printing takes about 4 minutes to
complete.
Note
• After head alignment is completed, you can print and check the current setting. To do so, click the
Print Head Alignment icon and when the message is displayed, click Print Alignment Value.
144

Canon Pixma iP110 series Specifications

General

Print Technology	Inkjet
Max Print Resolution	9600 x 2400 dpi
Print Speed (Monochrome)	9.0 ipm
Connectivity	USB 2.0, Wi-Fi
Weight	2.0 kg
Wireless Printing	Yes
Operating Temperature	5-35°C
Operating Humidity	10-90% RH
Mobile Printing	Apple AirPrint, Google Cloud Print
Paper Handling	50 Sheets
Paper Sizes	Letter, Legal, Envelopes
Printer Type	Portable
Number of Nozzles	1, 856 nozzles
Paper Sizes Supported	A4, A5, B5, Letter, Legal, Envelopes (DL, COM10)
Power Consumption	Approx. 10 W (printing), Approx. 1.8 W (standby)
Ink Droplet Size	2 picoliters