Managing the Printer Power
This function allows you to manage the printer power from the printer driver.
The procedure for managing the printer power is as follows:
Power Off
The Power Off function turns off the printer. When you use this function, you will not be able to turn the
printer on from the printer driver.
1.
Select Power Settings from the pop-up menu on the Canon IJ Printer Utility
2.
Execute power off
Click Power Off, and when the confirmation message appears, click OK.
The printer power switches off.
Auto Power
Auto Power allows you to set Auto Power Off.
The Auto Power Off function automatically turns off the printer when there are no operations from the
printer driver or the printer for a specified period of time.
A different time can be set depending on whether the AC adapter is used or the battery is used.
1.
Select Power Settings from the pop-up menu on the Canon IJ Printer Utility
2.
Check that the printer is on, and then click Auto Power
A dialog appears.
Note
•
If the printer is off or if communication between the printer and the computer is disabled, an
error message may appear because the computer cannot collect the printer status.
3. If necessary, complete the following setting:
Using AC Adapter:
Specify the time from the list. When the AC adapter is used and this time elapses without any
operations from the printer driver or the printer, the printer turns off automatically.
Using Battery:
Specify the time from the list. When the battery is used and this time elapses without any
operations from the printer driver or the printer, the printer turns off automatically.
Important
•
Disable cannot be specified for Using Battery:.
4. Apply the settings
161
To Next Page
Loading...
Need help?
General
