Safety Precautions
vii
Maintenance
Turn off the power before cleaning the camera.
Cleaning of Exterior
1 Dampen a soft cloth with water or diluted neutral
detergent and wipe away the grime gently.
2 Wipe with a dry cloth.
Cleaning of Lens
Use a commercial lens cleaner to remove grime on the
lens surface.
• Auto focus may not work properly if the lens
surface is dusty or dirty.
• Be aware that scratches on the lens surface may result
in poor image capture.
Cleaning of Front Cover, Dome Case, or
Dome Housing
Grime on any of the parts listed below will reduce image
quality, so periodic cleaning is required.
Front cover
Dome case
Dome (when using the separately sold indoor
dome housing)
If the surface of the above parts cannot be cleaned well,
remove them following the steps below to clean them
more thoroughly.
1 Remove the front cover, dome case, or dome.
See “Using Camera Housing” in the “VB-M700F
Installation Guide” to remove the front cover.
See steps in “Installing the Camera” in the “VB-
M600D/VB-M600VE Installation Guide” to remove the
dome case.
See steps in “Installing the Camera” in the
Installation Guide bundled with the indoor dome
housing and remove the dome.
2 Dampen a soft cloth with water or diluted neutral
detergent and wipe away the grime gently.
3 Wipe with a dry cloth.
4 Reattach the front cover, dome case or dome to its
original position.
Periodically check the brackets and screws for rust and
loosening to prevent injuries and equipment damage due
to falling items.
For inspections, please contact the dealer where you
purchased the product.
Maintenance for Recessed Mounting Kit
(dedicated option for VB-M600D/VB-
M600VE) or Ceiling Mount Cover (dedicated
option for VB-M40)
Periodically check the brackets and screws for rust and
loosening to prevent injuries and equipment damage due
to falling items.
For inspections, please contact the dealer where you
purchased the product.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
