14 - FINAL SHUT-DOWN
14.1 - Shutting down
Separate the units from their energy sources, allow them to cool then drain them completely.
14.2 - Recommendations for disassembly
Read information relating to the presence of potentially dangerous substances in the product and their precautions for use
(REACH, Regulation no. 1907/2006). This information is available on the Manufacturer's website.
Use the original lifting equipment.
Sort the components according to their material for recycling or disposal, in accordance with regulations in force.
Check whether any part of the unit can be recycled for another purpose.
14.3 - Fluids to be recovered for treatment
■ Refrigerant (In compliance with regulation F-GAS no. 517/2014)
■ Heat-transfer uid: depending on the installation, water, brine solution, etc.
■ Compressor oil
14.4 - Materials to be recovered for recycling
■ Steel
■ Copper
■ Aluminium
■ Plastics
■ Polyurethane foam (insulation)
The proportions of materials for each unit are listed in the Product Environmental Prole (PEP) available at the following website:
http://www.pep-ecopassport.org/fr/consulter-les-pep/
14.5 - Waste Electrical and Electronic Equipment (WEEE)
At the end of its life, this equipment must be disassembled and contaminated uids removed by professionals and processed via
approved channels for electrical and electronic equipment (WEEE).
99
To Next Page
Loading...
Need help?
General