Carrier RTU Open v3 User Manual

Appendix A: RTU Open Points/Properties in i-Vu®/Field Assistant
RTU Open v3 CARRIER CORPORATION ©2019
Installation and Start-up Guide All rights reserved
81
Point Name/Description
Default/Range
Service Test
– Enable to stop automatic control so you can test the controller's outputs.
Automatically resets to
Disable
after 1 hour.
D:
R:
Disable
Disable/Enable
Fan Test
– Enable to test the controller's fan operation. Operates fan at low speed if the
fan type is set to Two Speed. Resets to
Disable
when complete.
Service Test
must be
set to
Enable
.
D:
R:
Disable
Disable/Enable
High Fan Speed Test
– Enable to test the unit’s high speed fan operation. Operates fan
at high speed if
Fan Control
is set to
Two Speed
. Resets to
Disable
when complete.
Service Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Compressor 1 Test
– Enable to test the controller's compressor 1 output.
Service Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Compressor 2 Test
– Enable to test the controller's compressor 2 output.
Service Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Heat 1 Test
– Enable to test the controller's heat 1 output.
Service Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Heat 2 Test
– Enable to test the controller's heat 2 output.
Service Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Reversing Valve Test
– Enable to test the controller's reversing valve output.
Service
Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Dehumidification Test
– Enable to test the controller's Humidi-MiZer™ output.
Service
Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Power Exhaust Test
– Enable to test the controller's exhaust fan output.
Service Test
must be set to
Enable
.
D:
R:
Disable
Disable/Enable
Economizer Test
– Set to a value between 0 and 100% to test the controller's
economizer output.
Service Test
must be set to
Enable
.
D:
R:
0% Open
0 to 100% Open
VFD Speed Test
– Set to a value between 0 and 100% to test the controller's variable
speed fan output.
Service Test
must be set to
Enable
.
D:
R:
0%
0 to 100%

Carrier RTU Open v3 Specifications

General

Brand	Carrier
Model	RTU Open v3
Category	Controller
Language	English