LED Overview 5-5
5150 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3222-001 Standard Revision H
Copyright
©
2012-2015 Ciena
®
Corporation July 2015
10 Gigabit Ethernet Port LEDs
Each 10 Gigabit Ethernet port has a single LED. The LED is located to the left
of the port and indicates port status. See Figure 5-3 on page 5-4 and Figure
5-4 on page 5-4.
Table 5-4
10 Gigabit Ethernet Port LED
LED Indication Description
LNK / ACT Green Indicates a valid network connection.
Blinking Green The port is currently receiving or transmitting
Ethernet packets.