Ciena 5150 User Manual

2-1
5150 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3222-001 Standard Revision H
Copyright
©
2012-2015 Ciena
®
Corporation July 2015
Installation 2-
The 5150 is designed for deployment in Outdoor Street Cabinets, huts and
other unconditioned locations. The 5150 can also be deployed in a central
office environment. The 5150 can be mounted in a standard equipment rack
and requires 2 RUs of space.
This chapter provides installation instructions. It discusses the following
topics:
• “Package Contents”
• “Important Safety Information”
• “Mounting the Device”
• “Grounding”
• “10 Gigabit Ethernet Module(s)”
• “Power Supply Modules”
• “Transceivers”
• “Cable Installation and Guidelines”
• “Initial Configuration”
Package Contents
Upon receipt, examine all shipping containers and their contents. Carefully
unpack the 5150 from the packing material. Visually inspect all parts for
damage.
The following items are shipped with the 5150:
• Chassis (with two empty power supply slots)
• Filler plates (installed over the two slots where the 10 Gigabit Ethernet
Modules can be installed in the center section of the chassis, see Figure
1-1 on page 1-2)
• Grounding screws (the 2 grounding screws will be attached to the back of
the chassis to the right side of center, see Figure 2-2 on page 2-18)

Ciena 5150 Specifications

General

Brand	Ciena
Model	5150
Category	Switch
Language	English