Cisco 1130AG - Aironet - Wireless Access Point User Manual

2-3
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
OL-8369-05
Chapter 2 Installing the Access Point
Unpacking the Access Point
Warning In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a
minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332
Unpacking the Access Point
Follow these steps to unpack the access point:
Step 1 Open the shipping container and carefully remove the contents.
Step 2 Return all packing materials to the shipping container and save it.
Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each
item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative.
Package Contents
Each access point package contains the following items:
• Cisco Aironet 1130AG Series Access Point or Cisco Aironet 1130AG Series Lightweight Access
Point
• Cisco Aironet 1130AG Series Power Module (universal power module)–optional
• Mounting hardware kit
– One mounting plate
– One suspended ceiling adjustable T-rail clip (accomodates standard and recessed ceilings)
– One security hasp adapter
– Four 6 x 32 x ¼ in. flat head Phillips machine screws
– One 8 x 32 x 3/16 in. pan head Phillips machine screw
• Product quick start guide
• Translated safety warnings document
• Cisco product registration and Cisco documentation feedback cards

Cisco 1130AG - Aironet - Wireless Access Point Specifications

General

Brand	Cisco
Model	1130AG - Aironet - Wireless Access Point
Category	Wireless Access Point
Language	English