Cisco 6800 Series User Manual

Set Language
Depending upon how your phone is configured, you may be able to change the language used by your phone.
Procedure
Step 1 Press Applications .
Step 2 Select Device administration > Language.
Step 3 Select a language from the list of available languages.
Step 4 Select Save.
Set up Power Save
You can put your phone into power save mode when your phone is idle. If your phone is not idle, you can't
turn power save on and you see a message on the screen.
• In power save mode, your phone can't receive incoming calls.
• The Cisco IP Phone 6821 Multiplatform Phones does not support power save.
Note
When your phone is in power save mode, the screen is not lit and the Select button is lit. You press the Select
button to wake up the phone.
Procedure
Step 1 Press Applications .
Step 2 Select Device administration > Power save.
Step 3 Select OK.
Set Password
Reset your phone password regularly and keep your network secure.
Before you begin
You must have your password.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
161
Settings
Set Language

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English