Cisco 6800 Series User Manual

• Forward no answer
Step 3 Do any of the following:
• Enter the target number, to which you want to forward incoming calls from this phone line.
• Press the Contacts softkey and select a contact from your contact directories.
Step 4 Press Set to apply the settings.
Step 5 Verify that your calls are forwarded by looking for the call forward icon next to the line or at the top of
the phone screen.
Related Topics
Phone Web Page, on page 24
Forward Calls with the Phone Web Page, on page 73
Activate Call Forward All with Feature Activation Code Synchronization, on page 74
Forward Calls from Your Phone, on page 126
Forward Calls with the Phone Web Page
Use the phone web page to set up your phone to forward calls.
You can also set up call forward on your phone screen. For more information, see Forward Calls, on page 72
or Forward Calls from Your Phone, on page 126.
Before you begin
Your administrator must enable the call forward services. Otherwise, the configuration on the phone web
page doesn't take effect.
Procedure
Step 1 On the phone web page, click User Login > Voice > User.
Step 2 In the Call Forward section, set the Cfwd All, Cfwd Busy, Cfwd No Answer, or combination of them to
Yes, and enter a phone number for each of the call forward services that you want to enable:
• Cfwd All/Cfwd All Dest—Forwards all calls.
• Cfwd Busy/Cfwd Busy Dest—Forwards calls only if the line is busy.
• Cfwd No Answer/Cfwd No Ans Dest—Forwards calls only if the line is not answered.
• Cfwd No Answer/Cfwd No Ans Delay—Assigns a response delay time in seconds.
If your administrator disables the feature key synchronization (FKS) and XSI sync for call forward on
your phone, you can enter the value as number of seconds after which a call is forwarded.
If your administrator enables feature key synchronization (FKS) or XSI sync for call forward on your
phone, you can enter the value as number of rings after which a call is forwarded.
The call forward settings on the phone web page take effect only when FKS and XSI are disabled. For
more information, consult your administrator.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
73
Calls
Forward Calls with the Phone Web Page

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English