Cisco 7925G - Unified Wireless IP Phone VoIP User Manual

xi
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Preface
This chapter describes the intended audience, objectives, organization, and lists related documentation.
It contains the following sections:
• Overview, page xi
• Audience, page xi
• Organization, page xii
• Related Documentation, page xiii
• Obtaining Documentation and Submitting a Service Request, page xiii
Overview
Cisco Unified Wireless IP Phone 7925G Administration Guide provides the information you need to
understand, install, configure, and manage the Cisco Unified Wireless IP Phone 7925G on your network.
This guide is intended to be used to administer phones running with Cisco
Unified Communications
Manager Release 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, and 7.0(1).
Audience
Network engineers, system administrators, or telecom engineers should review this guide to learn the
steps required to properly set up the Cisco
Unified Wireless IP Phone 7925G on the wireless network.
The tasks described are considered to be administration-level tasks and are not intended for end-users of
the phones. Many of the tasks involve configuring network settings and could affect the phone
functioning in the network.
Because of the close interaction between the Cisco Unified Wireless IP Phone 7925G and Cisco Unified
Communications Manager, these tasks require familiarity with Cisco Unified Communications
Manager.

Cisco 7925G - Unified Wireless IP Phone VoIP Specifications

General

Brand	Cisco
Model	7925G - Unified Wireless IP Phone VoIP
Category	IP Phone
Language	English