Cisco 7925G - Unified Wireless IP Phone VoIP User Manual

4-12
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
Configuring Network Profiles
Note If you uncheck all channels in the 802.11g Power Settings window or 802.11a Power Settings window,
the phone will not be able to access the WLAN.
Related Topics
• Accessing the Phone Web Page, page 4-3
• Configuring Wireless LAN Security, page 4-13
• Setting the Wireless Security Credentials, page 4-15
• Setting Wireless Encryption, page 4-16
Configuring Wireless Settings in a Network Profile
You must configure wireless settings in a profile to enable the phone to access the wireless network. To
configure the wireless settings, refer to
Table 4-3 and follow these steps.
Procedure
Step 1 Choose the network profile that you want to configure.
Step 2 To give the profile a recognizable name, in the Profile Name field, enter a name up to 63 characters and
numbers in length.
Step 3 To identify the SSID that the phone uses to associate with access points, in the SSID field, enter an SSID
that is already configured in the WLAN.
Note The SSID is case sensitive; you must enter it exactly as configured in the network.
Step 4 To conserve battery power, in the Call Power Save Mode, choose the type (U-APSD or PS-Poll) and
option that is being used in the WLAN.
Step 5 Choose the signal mode or priority of signal modes in the 802.11 Mode field that is used by your WLAN,
802.11A Power Settings
Channel Assigns the channels Configuring Advanced
Network Profile
Settings, page 4-25
Status Enabled—Identifies enabled channels in WLAN
to improve scanning for the phone
Max Tx Power Sets the maximum transmit power for the phone
Table 4-4 Advanced Network Profile Settings (continued)

Cisco 7925G - Unified Wireless IP Phone VoIP Specifications

General

Brand	Cisco
Model	7925G - Unified Wireless IP Phone VoIP
Category	IP Phone
Language	English