5-2
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone 7925G
Configuring Network Profile Settings
• Model Information
• Status
Note These options are configurable; other options are display only.
Step 3 To select the item that you want to configure or view, do one of these actions:
• Use the Navigation button to scroll to the item and then press the Select button.
• Use the keypad to enter the number that corresponds to the item.
Step 4 If a menu option is locked , you must press ** # on the keypad.
When the menu is unlocked, displays.
Related Topics
• Configuring Network Profile Settings, page 5-2
• Changing Phone Settings, page 5-10
• Configuring the Security Certificate on the Phone, page 5-12
• Changing the USB Configuration, page 5-13
Configuring Network Profile Settings
On the Cisco Unified Wireless IP Phone 7925G, you can configure four network profiles for a specific
WLAN. Users who travel between company locations, can have separate network profiles for each
WLAN location. You can set up profiles with the local SSID, WLAN settings, and authentication
information for each location.
Note You can control whether a Cisco Unified Wireless IP Phone 7925G has access to the Network Profiles
menu from the Cisco Unified
Communications Manager Administration Phone Configuration page. Use
the Settings Access field in the Product Specific Configuration section of the phone configuration page.
For more information, see the
“Specific Configuration Options for the Cisco Unified Wireless
IP Phone 7925G” section on page 7-13.
These sections provide information about configuring network profiles:
• Accessing a Network Profile, page 5-3
• Changing the Profile Name, page 5-3
• Changing Network Configuration Settings, page 5-4
• Configuring DHCP Settings, page 5-6
• Configuring Wireless Settings for the Network Profile, page 5-8
To Next Page
Need help?
General
