3-7
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7925G
Installing the Cisco Unified Wireless IP Phone 7925G
Caution Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees
Celsius).
Caution Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees
Celsius).
Caution When discarding a battery pack, contact your local waste disposal provider regarding local restrictions
on the disposal or recycling of batteries.
To obtain a replacement battery, contact your local dealer. Use only the batteries that have the following
Cisco part numbers.
Standard battery—CP-BATT-7925G-STD
Extended battery—CP-BATT-7925G-EXT
Caution Use only the Cisco power supply. If you must replace your power supply, refer to the list of Cisco part
numbers.
Australia—CP-PWR-7925G-AU
Central Europe—CP-PWR-7925G-CE
China—CP-PWR-7925G-CN
Japan—CP-PWR-7925G-JP
North America—CP-PWR-7925G-NA
United Kingdom—CP-PWR-7925G-UK
Related Topics
• Network Requirements, page 3-1
• Providing Power to the Phone, page 3-7
Installing the Cisco Unified Wireless IP Phone 7925G
After setting up the wireless network to support voice communications and configuring the
wireless
IP phones in Cisco Unified Communications Manager, you are ready to install the phones. This
section includes the following installation information:
• Providing Power to the Phone, page 3-7
• Configuring Wireless LAN Settings for the Cisco Unified Wireless IP Phone 7925G, page 3-13
• Using a Headset, page 3-13
Providing Power to the Phone
The Cisco Unified Wireless IP Phone 7925G uses a battery for power. Table 3-3 lists the types of
batteries available for the wireless IP phone and the maximum talk and standby times.
To Next Page
Loading...
Need help?
General