Cisco 7961G User Manual

DescriptionLine or Call StateIcon
See Busy Lamp Field Features, on page 50.BLF-monitored line is
ringing (BLF Pickup)
See Busy Lamp Field Features, on page 50.Line in Do Not Disturb
(BLF feature)
The intercom line is not in use. See Intercom Calls, on page 41Idle Intercom line
The intercom line is sending or receiving one-way audio.
See Intercom Calls, on page 41.
NoteOne-way intercom call
You press the intercom line to activate two-way audio with the
intercom caller. See Intercom Calls, on page 41.
Two-way intercom call
Phone Screen Features
The following figure shows how your main phone screen may look with an active call.
Displays the phone number (directory number) for your primary phone
line. When several feature tabs are open, the phone number and the
time and date display alternately in this area.
Primary phone line1
Serve as phone line buttons, intercom line buttons, speed-dial buttons,
phone service buttons or phone feature buttons. Icons and labels indicate
how these buttons are configured.
Programmable buttons2
Displays a softkey function for the corresponding softkey button .
Softkey labels3
Displays audio mode icons, status information, and prompts.Status line4
Displays current calls per line, including caller ID, call duration, and
call state for the highlighted line (standard view). See Line and Call
Definitions, on page 6, and Multiple Calls, on page 29.
Call activity area5
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
7
Phone Features
Phone Screen Features

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English