Cisco 7961G User Manual

Then...If you want to...
Listen for a secure indication tone at the beginning of the call:
• Secure call status—If the phone is protected, the “Play
Secure Indication Tone” is enabled, and the call status is
secure, a secure indication tone plays on the protected
phone at the beginning of a call (three long beeps with
pauses). The lock icon is also present to indicate that the
call is secure.
• Nonsecure call status—If the phone is protected, the “Play
Secure Indication Tone” is enabled, and the call status is
nonsecure, a nonsecure indication tone plays on the
protected phone at the beginning of a call (six short beeps
with brief pauses). The play arrow icon is also present
to indicate that the call is not secure.
For more information, see your system administrator.
Verify that the phone connection (call status)
is secure
See your system administrator.Determine if secure calls can be made in
your company
There are interactions, restrictions, and limitations that affect how security features work on your phone. For
more information, see your system administrator.
Cisco determines whether a device engaged in a call is trusted or untrusted. Lock or shield icons are not
displayed on a Cisco Unified IP Phone screen when a call is to or from an untrusted device, even though
the call may be secure.
Note
VPN Client
Your system administrator configures the Virtual Private Network (VPN) Client feature as needed. If the VPN
Client feature is enabled and the VPN Client mode is enabled on the phone, you are prompted for your
credentials as follows:
•
If your phone is located outside the corporate network: You are prompted at logon to enter your credentials
based on the authentication method that your system administrator configured on your phone.
•
If your phone is located inside the corporate network:
◦
If Auto Network Detection is disabled, you are prompted for credentials, and a VPN connection
is possible.
◦
If Auto Network Detection is enabled, you cannot connect through VPN and you are not prompted
for credentials.
To access the VPN Configuration settings, press the Settings button and choose Security Configuration >
VPN Configuration.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
53
Calling Features
Secure Calls

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English