3-9
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Adjusting the Placement of the Cisco Unified IP Phone
Step 3 Select and enter your search criteria and click Find.
The Find and List Phone page reappears showing a list of the phones matching your search criteria.
Step 4 Click the IP Phone that you want to configure for the Cisco Unified IP Phone Expansion Module 7914.
The Phone Configuration page appears.
Step 5 Scroll to the Expansion Module Information section of the page.
Step 6 Add support for expansion modules:
• To add one expansion module, in the Module 1 field, select 7914 14-Button Line Expansion
Module.
• To add a second expansion module, in the Module 2 field, select 7914 14-Button Line Expansion
Module.
In the Expansion Module Information page, there are two fields for specifying the firmware load for
Modules 1 and 2. You can leave these fields blank to use the default firmware load.
Step 7 Scroll to the top of the page and click Update.
A message appears asking you to reset the phone for the changes to take effect. Click OK.
Step 8 Click Reset for the changes to take effect.
Note Refer users to their Cisco Unified Communications Manager User Options web pages so that they can
configure speed dial buttons and program buttons to access phone services on the Cisco
Unified IP
Phone Expansion Module 7914. See the
“How Users Subscribe to Services and Configure Phone
Features” section on page A-3 for more details.
Related Topics
• Before You Begin, page 3-1
• Adjusting the Placement of the Cisco Unified IP Phone, page 3-9
• Configuring Startup Network Settings, page 3-13
Adjusting the Placement of the Cisco Unified IP Phone
The Cisco Unified IP Phone includes an adjustable footstand. When placing the phone on a desktop
surface, you can adjust the tilt height to several different angles in 7.5 degree increments from flat to 60
degrees. You can also mount the phone to the wall using the footstand or using the optional locking wall
mount kit.
Adjusting Cisco Unified IP Phone Footstand and Phone Height
You can adjust the footstand adjustment plate on the Cisco Unified IP Phone to the height that provides
optimum viewing of the phone screen. See
Figure 3-3 for more information.
To Next Page
Loading...
Need help?
General
