4-20
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
UI Configuration Menu
The UI configuration menu displays the status of various user interface features on the phone. Table 4-11
describes the options on this menu.
Table 4-11 UI Configuration Menu Options
Option Description To Change
Auto Line Select Indicates whether the phone shifts the
call focus to incoming calls on all lines.
When this option is disabled, the phone
only shifts the call focus to incoming
calls on the line that is in use. When
this option is enabled, the phone shifts
the call focus to the line with the most
recent incoming call.
Default: Disabled
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
BLF for Call Lists Indicates whether the Busy Lamp Field
(BLF) is enabled for call lists.
From Cisco Unified Communications
Manager Administration, choose
System > Enterprise Parameters.
Reverting Focus
Priority
Indicates whether the phone shifts the
call focus on the phone screen to an
incoming call or a reverting hold call.
Settings include:
Lower—Focus priority given to
incoming calls.
Higher—Focus priority given to
reverting calls.
Even—Focus priority given to the first
call.
Use Cisco Unified Communications
Manager to modify options.
See also: Hold Reversion.
Auto Call Select Indicates whether the phone
automatically shifts the call focus to an
incoming call on the same line when
the user is already on a call.
When this option is enabled, the phone
shifts the call focus to the most recent
incoming call.
When this option is disabled, all
automatic focus changes, including
Auto Line Select, are disabled
regardless of their setting.
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
To Next Page
Loading...
Need help?
General
