Cisco 7965G Administration Guide

4-25
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Power Save Configuration Menu
The Power Save Configuration menu displays the settings that control when the LCD screen on a phone
turns off to conserve power.
Table 4-13 describes the options on this menu.
For detailed information about configuring these settings, see the “Automatically Disabling the Cisco
Unified IP Phone Screen” section on page 6-7.
Table 4-13 Power Save Configuration Menu Options
Option Description To Change
Display On Time Time each day that the LCD screen
turns on automatically (except on the
days specified in the Days Display Not
Active field).
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display On
Duration
Length of time that the LCD screen
remains on after turning on at the time
shown in the Display On Time option.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display Idle
Timeout
Length of time that the phone is idle
before the display turns off. Applies
only when the display was off as
scheduled and was turned on by an
end-user (by pressing a button on the
phone or lifting the handset).
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Days Display Not
Active
Days that the display does not turn on
automatically at the time specified in
the Display On Time option.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Display On If
Incoming Call
Indicates whether the LCD screen
automatically illuminates when a call is
received.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.

Cisco 7965G Specifications

General

Brand	Cisco
Model	7965G
Category	IP Phone
Language	English