4-2
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Configuration Menus on the Cisco Unified IP Phone 7965G and 7945G
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-3
• Overview of Options Configurable from a Phone, page 4-4
• Network Configuration Menu, page 4-5
• Device Configuration Menu, page 4-12
• Security Configuration Menu, page 4-32
Displaying a Configuration Menu
To display a configuration menu, perform the following steps.
Note You can control whether a phone has access to the Settings menu or to options on this menu by using
the Settings Access field in the Cisco
Unified Communications Manager Administration Phone
Configuration page. The Settings Access field accepts these values:
• Enabled—Allows access to the Settings menu.
• Disabled—Prevents access to the Settings menu.
• Restricted—Allows access to the User Preferences menu and allows volume changes to be saved.
Prevents access to other options on the Settings menu.
If you cannot access an option on the Settings menu, check the Settings Access field. For more
information, see Cisco Unified
Communications Manager Administration Guide.
Procedure
Step 1 Press the Settings button to access the Settings menu.
Step 2 Perform one of these actions to display the desired menu:
• Use the Navigation button to select the desired menu and then press the Select softkey.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 3 To display a submenu, repeat Step 2.
Step 4 To exit a menu, press the Exit softkey.
Related Topics
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-3
• Overview of Options Configurable from a Phone, page 4-4
• Network Configuration Menu, page 4-5
• Device Configuration Menu, page 4-12
To Next Page
Loading...
Need help?
General
