Cisco IE 4010 User Manual

Display Mode Button
The Display Mode Button allows you to choose the mode you want displayed by the port LEDs. The LEDs
with green text to the left of the Button indicate the chosen display mode. Each time you press the switch, the
mode indicator moves from SPEED, DUPLX, REDUN, SYNCE, and PoE respectively.
Power-Input Terminal
The power-input terminal provides screw terminals for the AC and DC power connections. The switch can
operate with one or two power supplies. If one of the power sources fail, the other continues to power the
switch. See Power Supply Installation, on page 37 for information.
Figure 3: Power-Input Terminal
100/1000 SFP Ports
The switch Ethernet SFP modules provide connections to other devices. These field-replaceable transceiver
modules provide the interfaces. The IE 4010 supports both FE and GE optics. SFP modules have local
connectors (LCs) for fiber-optic connections or RJ-45 connectors for copper connections.
For the most up-to-date list of supported SFP models, see the IE 4010 Data Sheet.
For information about SFP modules, see your SFP module documentation and the Installing and Removing
SFP Modules, on page 28 . For more information about SFP/SFP+ modules and cables, see Transceiver
Modules.
Console Ports
You can connect the switch to a PC running Microsoft Windows or to a terminal server through either the
RJ-45 console port or the USB console port.
• RJ-45 console port. The RJ-45 connection uses an RJ-45-to-DB-9 female cable.
• USB mini-Type B console port (5-pin connector). The USB connection uses a USB Type A-to-5-pin
mini-Type B cable.
The USB console interface speeds are the same as the RJ-45 console interface speeds.
Cisco IE 4010 Switch Hardware Installation Guide
5
Product Overview
Display Mode Button

Cisco IE 4010 Specifications

General

Brand	Cisco
Model	IE 4010
Category	Switch
Language	English