Cisco IE 4010 User Manual

Figure 8: Attaching Brackets for 19-Inch Racks (Rear Mount)
Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional)
Before installing the mounting brackets, you need to install the rubber plugs in the unused mounting holes.
The following figure shows a close-up of the rubber plug. You can install the rubber plugs in the holes as
shown in the next figure.
Cisco IE 4010 Switch Hardware Installation Guide
19
Switch Installation
Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional)

Cisco IE 4010 Specifications

General

Brand	Cisco
Model	IE 4010
Category	Switch
Language	English