QoS
Advanced Mode
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 182
9
STEP 4 Click Add To List. The new aggregate policer is defined and is displayed in the
Aggregate Policer Table in the bottom half of the
New Aggregate Policer Screen
.
STEP 5 Click Save & Close to save the new aggregate policer and close the
New
Aggregate Policer Screen
(clicking Save keeps the
New Aggregate Policer
Screen
open). The device is updated.
To delete an aggregate policer from the device:
STEP 1 In the Aggregate Policer Table, select the entry.
STEP 2 Click Delete. The selected aggregate policer is deleted from the device.
Interface To Policy
The
Interface To Policy Screen
displays
QoS policies which are bound to specific
interfaces.
STEP 1 Click QoS > Advanced Mode. The
Advanced Mode Screen
opens.
STEP 2 In the Interface To Policy area, click View Interface To Policy. The
Interface To
Policy Screen
opens.
To Next Page
Loading...
Need help?
General
