1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 8
Getting Started
This section provides an introduction to the user interface, and includes the
following topics:
• Starting the Application
• Understanding the Interface
• Using the Device Command Buttons
• Using Screen and Table Options
• Resetting the Device
• Logging Out of the Device
Starting the Application
This section contains information for starting the Linksys User Interface.
NOTE By default, the IP address of the device is assigned dynamically, although it can be
changed to a static IP address by an administrator.
To open the User Interface:
STEP 1 Open a web browser.
STEP 2 Type the device’s IP address in the address bar and press Enter. The
Authentication Page
opens.
To Next Page
Loading...
Need help?
General
