Cisco SPS224G4 User Manual

Spanning Tree
MSTP Instance Settings
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 201
10
MSTP Instance Settings
MSTP maps VLANs into STP instances. Packets assigned to various VLANs are
transmitted along different paths within MST Regions. Regions are one or more
Multiple Spanning Tree bridges by which frames can be transmitted. In configuring
MSTP, the MST region to which the device belongs is defined. A configuration
consists of the name, revision, and region to which the device belongs.
Network Administrators can define MSTP Instances settings using the
MSTP
Instance Settings Screen
.
To define the MSTP instance settings on the device:
STEP 1 Click Spanning Tree > MSTP Instance Settings. The MSTP Instance Settings
Screen
opens.
Figure 90 MSTP Instance Settings Screen
The
MSTP Instance Settings Screen contains the following fields:
• VLAN Instance Configuration — Opens the VLAN Instance Configuration
Screen, in which administrators can map VLANs to MSTP Instances. See
VLAN Instance Configuration following this section. See VLAN Instance
Configuration.
• Instance ID — Specifies the instance being defined. The possible values
are 1-7.

Cisco SPS224G4 Specifications

General

Brand	Cisco
Model	SPS224G4
Category	Switch
Language	English