6-14
Cisco UCS Server Configuration Utility, Release 5.0
Chapter 6 Installing Operating Systems
Other OS Install
• Select IP Address from DHCP server or Static IP Address. If you select Static IP Address, do the
following:
–
In the IP Address field, enter the IPv4 address.
–
In the Subnet Mask field, enter the subnet IPv4 address.
–
In the Gateway field, enter the gateway IPv4 address.
–
In the DNS field, enter the DNS IPv4 address.
• Click OK.
SUSE Linux Server Operating System Installation
To perform an unattended SLES operating system installation, follow these steps:
Step 1 To enter the unattended operating system installation function area, click OS Install in the left
navigation pane.
The OS Install page appears.
Step 2 Click the SLES radio button and choose an operating system from the Operating System drop-down list.
The Default Settings area and the Quick Install and Custom Install buttons appear.
Step 3 Click Custom Install.
A progress bar is displayed that indicates the tasks being performed and the percentage of completion.
A new OS Install page appears with the following list of collapsible windows:
• Basic Configuration—To set the personalization settings, go to Basic Configuration, page 6-13.
• Installation Partitions—To set the installation partition settings, go to Installation Partitions,
page 6-8.
• Package Selection—To set the package selection settings, go to Package Selection, page 6-13.
• Network Settings—To set the network settings, go to Network Settings, page 6-13.
• Installation Drivers—To set the driver settings, go to Installation Drivers, page 6-10.
Step 4 Click Install.
A progress bar is displayed that indicates the tasks being performed and the percentage of completion.
An OS Install dialog box appears.
Step 5 Click Ok.
Step 6 Remove the UCS-SCU media and insert the required operating system CD.
Basic Configuration
To configure the basic configuration settings, follow these steps:
Step 1 Click Basic Configuration to open the corresponding window.
Step 2 In the Basic Configuration window, do the following:
• In the Root Password field, enter the root password.
To Next Page
Loading...
Need help?
General
