Convotherm 4 easyDial User Manual

5.2.1 Cooking Workflow for a Multi-Step Cooking Profile
Prerequisites
You must have opened a multi-step cooking profile from the “cookbook.”
You must have pre-heated or cooled down the cooking compartment after being prompted to do
so.
You must have already placed the food you want inside the cooking compartment.
Cooking workflow steps
Step 1
Starting
After the appliance door is closed, the C-Dial
will light up with a solid green light. Pressing
the C-Dial will start the cooking process.
Step 2
Cooking step 1
The cooking sequence will start with cooking
step 1. During all cooking steps, the remaining
total cooking time / the internal temperature
reached will be displayed alternately with the
current cooking step. The C-Dial will light up
with a solid red light.
Step 3
Cooking step 2
The cooking sequence will continue with
cooking step 2. The C-Dial will light up with a
solid red light.
Step 4
Cooking step 3
The cooking sequence will continue with
cooking step 3. The C-Dial will light up with a
solid red light.
Step 5
The cooking process ends
Once the end of the cooking sequence is
reached, the C-Dial will start flashing with a
green light.
The appliance prompts the user to remove the
food from cooking compartment
An acoustic signal asking for the food to be
removed from the appliance will be emitted
and the “open appliance door” prompt
indicator will light up at the same time.
5 Using the Cookbook
Operating instructions 43

Convotherm 4 easyDial Specifications

General

Brand	Convotherm
Model	4 easyDial
Category	Oven
Language	English