Convotherm 4 easyDial User Manual

6.2.2 Workflow for Oven Cleaning Without Cleaning Agent
Prerequisites
The appliance door must be closed.
The “oven cleaning without cleaning agent” cleaning profile must have been selected.
The cleaning profile must have been started.
Steps for oven cleaning without cleaning agent
Step 1
The user removes all food
Before the “oven cleaning without cleaning
agent” process starts, all food needs to be
removed from the cooking compartment. The
C-Dial will light up with a solid green light.
The appliance prompts the user to open the
appliance door
An acoustic signal asking for the food to be
removed from the appliance will be emitted
and the “open appliance door” prompt
indicator will light up at the same time.
Step 2
The user removes all food
While the user checks to make sure that all
food has been removed, the “close appliance
door” indicator will light up. The C-Dial will
light up with a solid yellow light.
Step 3
Clean
After the appliance door is closed, the “oven
cleaning without cleaning agent” process will
start. The display will show the remaining
cleaning duration. The C-Dial will light up with
a solid yellow light.
Step 4
The cleaning process ends
Once the end of the cleaning process is
reached, the C-Dial will start flashing with a
green light.
The appliance prompts the user to open the
appliance door
An acoustic signal asking for the food to be
removed from the appliance will be emitted
and the “open appliance door” prompt
indicator will light up at the same time.
6 Cleaning with easyDial
Operating instructions 52

Convotherm 4 easyDial Specifications

General

Brand	Convotherm
Model	4 easyDial
Category	Oven
Language	English