Convotherm 4 easyDial User Manual

6.2.4 Workflow for Fully Automatic ConvoClean Oven Cleaning with Single-
Measure Dispensing
Prerequisites
The appliance door must be closed.
A fully automatic ConvoClean oven cleaning profile must have been selected.
The cleaning profile must have been started.
Fully automatic ConvoClean oven cleaning steps
Step 1
The user removes all food
Before the fully automatic ConvoClean oven
cleaning process (with single-measure
dispensing) starts, all food needs to be
removed from the cooking compartment. The
C-Dial will light up with a solid green light.
The appliance prompts the user to open the
appliance door
An acoustic signal asking for the food to be
removed from the appliance will be emitted
and the “open appliance door” prompt
indicator will light up at the same time.
Step 2
The user removes all food
While the user checks to make sure that all
food has been removed, the “close appliance
door” indicator will light up. The C-Dial will
light up with a solid yellow light.
Step 3
1st cleaning stage
Immediately after the appliance door is
closed, the 1st cleaning stage (soaking stage)
of the fully automatic ConvoClean oven
cleaning process (with single-measure
dispensing) will start. The display will show
the remaining cleaning duration. The C-Dial
will light up with a solid yellow light.
Step 4
The appliance prompts the user to add
cleaning agent
Once the 1st cleaning stage is complete, an
acoustic signal will be emitted and the “open
appliance door” and “not enough cleaning
agent” indicators will light up.
Step 5
The user adds cleaning agent
While cleaning agent is being added, the
“close appliance door” and “not enough
cleaning agent” indicators will light up. The
system will also display the number of bottles
required. The C-Dial will light up with a solid
yellow light.
6 Cleaning with easyDial
Operating instructions 54

Convotherm 4 easyDial Specifications

General

Brand	Convotherm
Model	4 easyDial
Category	Oven
Language	English