DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Switch Management 175
The following table summarizes the Root, User+ and User
privileges:
Switch Configuration Privilege
Management Admin User
Configuration Yes Read Only
Network Monitoring Yes Read Only
Community Strings and Trap
Stations
Yes Read Only
Update Firmware and Configuration
Files
Yes No
System Utilities Yes Ping Only
Factory Reset Yes No
Reboot Switch Yes No
User Account Management
Add/Update/Delete User Accounts Yes No
View User Accounts Yes No
Table 6-1. Root, User+, and User Privileges
After establishing a User Account with Admin-level privileges,
highlight Save Changes and press Enter (see below). The
switch will save any changes to its non-volatile ram and reboot.
You can logon again and are now ready to continue configuring
the Switch.
Saving Changes
The DES-3326Ss has two levels of memory; normal RAM and
non-volatile or NV-RAM. Configuration changes are made
effective by highlighting Apply and pressing the Apply button.
To Next Page
Loading...
Need help?
General