DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
27
♦ All LED indicators will momentarily blink. This blinking
of the LED indicators represents a reset of the system.
♦
The power LED indicator is always on after the power is
turned ON.
♦ The console LED indicator will blink while the Switch
loads onboard software and performs a self-test. will
remain ON if there is a connection at the RS-232 port,
otherwise this LED indicator is OFF.
♦ The 100M LED indicator may remain ON or OFF
depending on the transmission speed.
Power Failure
As a precaution in the event of a power failure, unplug the
switch. When power is resumed, plug the switch back in.
To Next Page
Loading...
Need help?
General