DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
242 Web-Based Switch Management
<125>
125 seconds. This specifies the
length of time between sending IGMP
queries.
Max Response
Time <10>
Sets the maximum amount of time
allowed before sending an IGMP
response report. A value between 1
and 25 seconds can be entered, with
a default of 10 seconds.
Robustness
Variable <2>
A tuning variable to allow for
subnetworks that are expected to
lose a large number of packets. A
value between 2 and 255 can be
entered, with larger values being
specified for subnetworks that are
expected to lose larger numbers of
packets.
DVMRP Interface Configuration
To configure DVMRP for an IP interface, Click the DVMRP
Interface Configurations link from the IP Multicast
Routing Protocols folder:
Figure 6-48. DVMRP Interface Configuration
To Next Page
Loading...
Need help?
General