27D-Link DHP-W306AV User Manual
Section 3 - Configuration
Select the Channel Width:
- Select if you are using both 802.11n and non-802.11n wireless devices.
- Select if you are not using any 802.11n wireless clients.
Select the transmission rate. is recommended for best performance.
Check the box if you do not want the SSID of your wireless network to be broadcasted by the DHP-W306AV. If checked,
the SSID of the DHP-W306AV will not be seen by site survey utilities, so your wireless clients will have to know the SSID
of your DHP-W306AV in order to connect to it.
Refer to page 43 for more information regarding wireless security.
Enables the Wi-Fi Protected Setup feature.
Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN.
Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network
settings with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager
user.
Shows the current value of the access point’s PIN.
Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user
interface of the user.
Restores the default PIN of the access point.
Resets Wi-Fi Protected Status to Not Congured. The Vista WPS icon will only be displayed when the Wi-Fi Protected
status is Not Congured.
Channel Width:
Transmission Rate:
Enable Hidden
Wireless:
Security Mode:
Enable:
Lock Wireless
Security Settings:
Current PIN:
Generate New
PIN:
Reset PIN to Default:
Reset to
Unconfigured:
To Next Page
Loading...
Need help?
Power
Operating Environment
Weight and Dimensions
