D-Link DHP-W306AV User Manual

71D-Link DHP-W306AV User Manual
Appendix A - Wireless Basics

Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by
turning on the WPA, WPA2, or WEP security feature on the access point. Refer to product manual for detail information
on how to set it up.
  
There are basically two modes of networking:
All wireless clients will connect to an access point or wireless bridge.
  Directly connecting to another computer, for peer-to-peer communication, using wireless
network adapters on each computer, such as two or more wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless bridge. All the wireless devices, or clients, will connect
to the wireless bridge or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in
Ad-Hoc mode to communicate.
Wireless Modes

D-Link DHP-W306AV Specifications

Power

power input	240 V AC, 50/60 Hz
power saving mode	supported

Operating Environment

operating temperature	0º to 40ºC (30º to 104ºF)
operating humidity	10% to 95% non-condensing

Data Transmission

powerline data rate	200 Mbps (PHY rate)
ethernet data rate	10/100 Mbps (autonegotiation)
wireless data rate	up to 300 Mbps

Frequency and Modulation

powerline frequency band	2 MHz to 30 MHz
wireless frequency range	2.4 GHz to 2.497 GHz
powerline modulation scheme	OFDM Symbol Modulation

Weight and Dimensions

dimensions	105 x 70 x 52 mm (4.1 x 2.8 x 2.0 inches)
weight	208 g (0.46 lb)